1133 Chatmoss Dr., Va. Beach, Va. 23464; (757) 495-8229
Originally written: Circa 1989
Last updated: June 13, 2009
Fasteners for wood subframe
Item Description # required # purchased
1. #8 x 3/4" Flathead wood screw
a) 6 b) 8 c) 4 d) 6 24 30
2. #8 x 7/8" round head wood screws 25 30
3. #8 x 1" Flathead wood screws
a) 4 b) 8 c) 2 14 20
4. #8 x 1 1/4" Flathead wood screws
a) 2 b) 4 c) 6 d) 2 14 20
5. #8 x 1 1/2" Flathead wood screws
a) 2 b) 4 6 10
6. #8 x 1 3/4" Flathead wood screws
a) 0 b) 6 c) 4 10 12
7. #10 x 1" Flathead wood screws
a) 8 b) 4 c) 2 d) 0
e) 4 f) 28 g) 8 54 100
8. #10 x 1 1/4" Flathead wood screws
a) 6 6 10
9. #10 x 1 1/2" Flathead wood screws
a) 6 6 10
10. #10 x 2" Flathead wood screws
a) 4 b) 4 8 12
11. #8 x 2 1/4" Flathead wood screws
a) 4 4 6
12. 1/4 x 2" carriage bolts
a) 4 - used to hold the trunk frame to the rear fender wells
b) 4 - used to hold the rear tire support frame to the rear
fender wells
c) 10 - used to hold the wooden frame to the chassis
Notes: 1. The artwork is compliments of BONNETS UP, 5736 SPRING
STREET, CLINTON MARYLAND 20725.
2. Since both sides of the car are mirror images, each numbered
item is duplicated on the other side of the car.
3. To remove the back cross brace, remove the rear fender well from
the chassis mount. This leaves a U of the cross brace and the 2
chassis mounts. There are 2 screws (1c) at each corner.