NUTS, BOLTS, FITTINGS & HINGES
CONSULT WITH THE OTHER INDEXES OTHER PERTINENT INFORMATION
1. BOLTS
1.01 Chart of Screws, Nuts & Bolts
1.02 Load Calculator
1.03 Head Bolt Installation
1.04 Head Size to Bolt Size Table of Concordance
1.05 Specs & Torques: Plus 4s & 4/4s
1.06 Stover Nuts (and why I love them)
1.07 Strength Grades & Markings

2. MORGAN SPECIFIC
2.01 Chassis (A list of fasteners)
2.02 Door Hinges (exchanging new for old)
2.03 Door Hinges (Loose)

2.04 Specs & Torques for Plus 4s a 4/4s
2.05 Triumph Bolt Symbols Translated
2.06 Wooden Tub (A list of fasteners)

3. REPAIR & EXTRACTION
3.01 Drill sizes for all Self-Tapping Screws
3.02 E-Taps  (Rare taps and dies)
3.03 Freeing Up Rusted Nuts & Bolts
3.04 Helicoils(thread replacement)
3.05 Spanner Gap Comparison
3.06 Tap Drill Sizes
3.07 Timesert (thread replacement)
3.08 Using Standard American Tools for Metric

4. THREADS
4.01 BA Threads
4.02 Metric Threads
4.03 Thread Sizes
4.04 UNF, UNC, UNE & UTS Threads
4.05 Whitworth Bible
4.06 Whitforth Threads

5. TORQUE
5.01 All Bolts and Grades
5.02 Calculating Programs
5.03 Different methods
SEE YOUR MODEL MOTOR FOR MORE

Google
Web www.gomog.com


An immense effort over a period of two decades was required to create these resources. The information contained here may not be reproduced and is offered without any undertaking whatsoever. No warranty is suggested or may be implied. We ask that those who publicly cite any items here to please credit this source. This is the best way of providing backup and clarification to readers. Should you have a contribution or a correction to this Manual that you feel may assist your fellow Morgan enthusiasts please email us.

 
This Manual is an ongoing process. We have a waiting line for posting many times what is presently available on line. If you have a problem you do not see covered here, you are welcome to use the  GoMoG Help Line for a quicker answer (assuming we are not mogging!
I
 
GoMoG MANUAL GoMoG MAIN PAGE